PSP & ASA Series Axial Leaded Non-Inductive Bulk Ceramic  Resistors provide excellent performance where high peak power or high-energy pulses must be handled in a small size.  The advantage of the bulk construction is that it produces an  inherently non-inductive resistor; and it allows energy and  power to be uniformly distributed through the entire ceramic resistor body - there is no film or wire to fail. We offer a full  line of rugged, reliable ceramic resistors- including custom  designs. two distinctly different ceramic materials are  available in each size to afford the designer with unique  components to meet the most demanding requirements. 

ASA alternatives to hard to find carbon composition resistors,  composition resistors can be used as drop-in replacements  for 1 and 2 watt sizes. Much larger sizes, up to 70 watts in a  single component, are available for new or redesigns where  an array of smaller resistors may have been previously required.

（一）Features：

Ⅰ Non-inductive “bulk ceramic” resistor 

Ⅱ Uniform distribution of energy throughout resistor body 

Ⅲ Replacement of Carbon Composition Resistors

Ⅳ Large peak energy in small size 

Ⅴ High power dissipation (Type PSP) 

Ⅵ High voltage and energy absorption (Type ASA) 

Ⅶ Through-hole or post mountable

(二)Type: ASA an PSP SERIES 

(三)Power Rating: 1.5=1.5W,2.0W=2.0W,2.5W=2.5W....10W=10W

(四)Tolerance: K=±10%,L=±20%

(五)Resistance Value:10R0=10Ω、100R0=100Ω